Hydraulic lifting platform operating procedures

Update:11 May 2019
Summary:

Vehicle lift The vehicle-mounted lifting platform is us […]

Vehicle lift
The vehicle-mounted lifting platform is used to improve the mobility of the lifting platform, and the lifting platform is fixed on the battery truck or the truck. It takes the power of the automobile engine and realizes the lifting function of the vehicle-mounted lifting platform. To adapt to the high-altitude operations inside and outside the plant. According to the lifting mechanism of the lifting platform, the vehicle-mounted lifting platform is divided into: a vehicle-mounted scissor lifting platform, a vehicle-mounted aluminum alloy lifting platform, and a vehicle-mounted folding arm lifting platform. Vehicle-mounted lifting platform is widely used in high-altitude operations in hotels, buildings, airports, stations, stadiums, workshops, warehouses, etc. It can also be used as temporary high-altitude lighting, advertising and so on.

Hydraulic lifting platform operating procedures
1 The hydraulic lifting platform (hereinafter referred to as the platform) has been inspected and debugged before leaving the factory. All technical indicators have reached the design requirements, and only need to be connected to the ground wire during use. The hydraulic electrical system does not need to be adjusted.
2, the platform should be carefully checked before use, hydraulic and electrical systems, no leakage or exposure can be used.
3. When the platform is used, the four legs should be firmly supported on a solid ground (the walking wheel will be off the ground). If necessary, the sleepers can be used.
4, the platform air transport 1-3 times after the loadable operation.
5. The center of gravity of the load should be at the center of the work surface as much as possible.
6. The movable door at both ends of the protective railing should be locked and locked before operation.

https://www.heirrmu.com